New Features

• Glow's garbage collection (unnecessary RAM usage cleaner) feature has been improved. The program now uses between 25 - 35 MB of RAM even if it runs for days.
• Glow now fully supports menu navigation with arrow keys. Use the right arrow key to navigate to subpages and the left arrow key to navigate to upper pages.
• The Glow menu algorithm has been updated. It now operates 70% more efficiently and stably.
• The Tools section's functionality has been renewed. You can now use Glow even while tools are running.
• The Cache Cleaning Tool has been improved to also clean the 'C:/Windows/Prefetch' directory.
• Tools now support minimizing to the system tray.
• When a tool is open, if you try to open the same tool again, the program will notify you that the tool is already open.
• If a tool is open and minimized to the tray, it will restore to its window size and notify you.
• The System Time feature in the Operating System section has been improved to show the time in 24-hour format.
• The System Boot Time feature in the Operating System section has been improved to show the month in a 12-month format.
• The System Boot Time feature in the Operating System section has been improved to show seconds as well.
• The Last Boot Date feature in the Operating System section has been improved to show seconds as well.
• The Detected Blue Screen Count feature in the Operating System section has been improved to scan both 'C:/Windows/Minidump' and 'C:/Windows/memory.dmp'.
• Added Last Blue Screen Error Time feature to the Operating System section. This feature compares the time of the most recent blue screen with your system's time, providing detailed information about when you last experienced a blue screen. This feature is dynamic.
• Added Last BIOS Time feature to the Motherboard section. This feature shows the boot time of your computer.

Bug Fixes

• Fixed an issue where the page keys did not change during page navigation using arrow keys in the left menu.
• Fixed an issue where pages were called twice during page transitions.
• Fixed an issue where the date of the System Last Shutdown Time in the Operating System section was printed with a colon instead of a dot.
• Fixed an issue causing the scrollbar to sometimes not appear in the Installed Drivers section table.
• Fixed a rendering issue causing text in the header section of the Installed Drivers table to flicker and shift slightly down.
• Fixed an issue causing the scrollbar to sometimes not appear in the Installed Services section table.
• Fixed a rendering issue causing text in the header section of the Installed Services table to flicker and shift slightly down.
• Fixed a DPI issue within the Cache Cleaning Tool.

Changes

• Renamed the Total Blue Screen Count in the Operating System section to Detected Blue Screen Count.
• The Processing Time feature within the Export Information feature, under Text Document and HTML Document export options, now shows in 24-hour format.
• Revised the Turkish and English language files.
• Made some function changes and adjustments for better performance of Glow.

New Features

• A Tools tab has been added to Glow's top menu. This tab contains useful tools.
• Added SFC and DISM Automation Tool to the Tools tab. This tool automatically performs SFC and DISM operations. You can also access this section with the CTRL + Q shortcut.
• Added Cache Cleaning Tool to the Tools tab. This tool allows you to automatically clean Temp and %temp% directories. You can also access this section with the CTRL + W shortcut.
• Added System Last Shutdown Time feature to the Operating System section. This feature shows the last time you shut down the system.
• Added Total Blue Screen Count feature to the Operating System section. This feature shows the number of blue screens you have encountered. Additionally, there is a button that, when clicked, takes you to the folder where blue screen errors are stored. This button activates only if blue screen errors exist.
• Added TPM Physical Presence Version feature to the Motherboard section. This feature shows the physical version of the TPM chip.
• Added TPM Manufacturer feature to the Motherboard section. This feature shows the manufacturer of the TPM chip.
• Added TPM Manufacturer ID feature to the Motherboard section. This feature shows the unique ID of the TPM chip manufacturer.
• Added TPM Manufacturer Version feature to the Motherboard section. This feature shows the version assigned to the chip by the TPM chip manufacturer.
• Added TPM Full Manufacturer Version feature to the Motherboard section. This feature shows the full version assigned to the chip by the TPM chip manufacturer.
• Added TPM Manufacturer Publisher feature to the Motherboard section. This feature shows which company published the TPM chip.
• Added Secondary Bus Type feature to the Motherboard section. This feature shows the name of the secondary bus of the motherboard.
• Added Processor Thread Count feature to the Processor section. This feature shows how many different threads the processor is currently handling. It is a dynamic feature.
• Added Battery Report Generation feature to the Battery section. This feature performs the same function as 'powercfg /batteryreport' from CMD, but in an automated manner.
• Improved the HTML export feature within the Export Information feature. The HTML file now displays Glow's logo in the tab icon.

Bug Fixes

• Fixed an issue causing repeated reading of data in sections with multiple hardware support (e.g., RAM).
• Fixed UI issues causing features to become stuck in some sections.

Changes

• Revised Turkish and English language files.
• Made some function changes and adjustments for better performance of Glow.

New Features

• Glow's language folder has been renamed. Now the language files are kept in the g_langs folder instead of the langs folder. This was due to conflicts caused by all software developed by me using the same folder name.
• Glow's interface now resizes itself for higher DPI levels. This means that the interface overlays are fully responsive to Glow's size.
• Glow now offers a seamless experience when resizing up to 200% DPI.
• Glow's graphics engine has been updated. It now delivers Ultra HD text and visual quality up to 16K resolution displays.
• Glow's interface has been accelerated. All interface sections now run at high performance.
• The BIOS Mode feature in the Motherboard section has been reprogrammed. It now shows 99% correct results.
• The Installed Driver/Service Count design in the Installed Drivers and Installed Services section has been revamped. It now prints underneath instead of side by side. In this way, it has gained a modern look.

Bug Fixes

• Fixed minor DPI bugs in Windows 10 versions 21H2 and 22H2.
• Fixed a bug where the header sometimes flickered on Windows 11 systems.
• Fixed a bug that caused Glow to send the wrong query to Windows during Double Buffering.
• Fixed a bug where some interface sections would not fit on the screen at different DPI levels.
• The error that caused the Slot names of the RAM section in the information exported with the Export Information feature to print incorrectly has been fixed.
• Fixed a bug that caused the storage partition to leak memory when reading disk information.
• Fixed a bug where the primary value was lost at different DPI and resolution values of the battery compartment's container.
• Fixed a bug where the height of the button to clear the search box in Installed Drivers / Installed Services did not change at different DPI levels.
• The sizing error that caused the table in the Installed Drivers / Installed Services section to not fit on the screen at high DPI levels has been fixed.
• Nearly 20 minor bugs and interface fixes were made.

Changes

• Glow no longer needs kernel32.dll to read BIOS Mode. Of course it still uses kernel32.dll for other operations.
• Glow's page logo in the top menu has been reduced in size.
• Glow's interface has been centered with the top menu and left menu, resulting in a smoother interface design.
• Turkish and English language files have been edited.

New Features

• A setting called Hiding Mode has been added to Glow settings. This setting allows you to hide private information such as email, serial number, device ID, etc. When Hiding Mode is on, the Export Information feature also exports the hidden features as private.
• Glow's setting saving algorithm has been revamped. Instead of making different containers for each different setting, all settings are now kept in the same container.

Bug Fixes

• Fixed a bug where the width of the container in the Network section was incorrect.

Changes

• Shortcut key layout has been changed. Shortcut keys now continue from F1 to F12.
• Turkish and English language files have been updated.

New Features

• SFC and DISM Automation Tool added to Tools section. This is a powerful tool that autoruns the necessary commands to repair the operating system.
• Added System Family feature to the Motherboard section. This feature shows which Family the laptop devices are in.
• Added System SKU to Motherboard section. This feature shows the Stock Code of laptop devices in particular.
• Bulgarian language support added.
• Czech language support added.

Bug Fixes

• Fixed a bug that prevented the top menu from being centered.
• Fixed a bug where some tools could change the language of the program but not the language of the program.
• Fixed a bug where the bottom margin of all tabs in Glow was inconsistent.
• Fixed a bug that caused an unused Font to be called in Glow.
• Fixed a major UI bug that caused all text in Glow to scroll. It now appears perfectly aligned.
• Fixed a bug in Windows 11 where the Export Information feature sometimes bugged.

Changes

• Windows 8.1 support has been removed. To make Glow better, we are ending support for older generation operating systems. Glow will continue to work on Windows 8.1 and below. However, we will not offer support.
• BIOS Major-Minor Version and SM-BIOS Major-Minor version features in the motherboard section have been moved to a separate container.
• IPv4 Address and IPv6 Address in the Network section were moved to a separate container.
• Changes were made in the translation of some languages.

Removed Features

• The support page has been removed.

New Features

• TPM Audit Tool has been added in Tools. This is a dynamic tool to showcase the best TPM features ever.
• File Cleanup Tool has been added in Tools. This tool has the ability to dynamically show and clean Windows Update, junk system files and junk user files.
• As of Glow v1.67, it now requires administrator permission. This was a prior decision to add some features and make it more stable.
• Hungarian language support added.
• Indonesian language support added.
• Japanese language support added.
• Korean language support added.
• Polish language support added.
• Swedish language support added.
• Ukrainian language support added.
• Ping Test Tool was developed. It now shows IP addresses next to the addresses with Domain. In addition, when the selected address is double clicked, the function of copying to the clipboard has been added.
• A dynamic inspection feature has been added to all Tools. It now alerts you when you minimize or background a tool and when you want to open it again. It doesn't just alert you, it brings the tool to the foreground.

Bug Fixes

• Fixed some interface bugs and conflict bugs.
• Fixed memory leaks caused by some features on the source code.
• Fixed a network issue on the Ping Test Tool. It now works seamlessly with Wi-Fi.
• Fixed conflict issues with some languages.
• Fixed extra processor load during page transitions.
• Fixed a bug where some places were not compatible with the theme.
• Fixed an issue where the support screen was buggy.
• Fixed a bug that prevented copying information on the support screen.
• Fixed a bug that caused some icons to appear blurry.
• Fixed some monitor count detection issues on Windows 10 systems.
• Fixed some function bugs.
• About 20 minor bug and stabilization fixes.

Changes

• Some language files have been updated.
• Changes have been made in some languages.
• Minor changes were made to the color theme.

New Features

• Added a special algorithm for unknown disks to Disk Partition. This algorithm can automatically identify the Disk Manufacturer based on the disk name.

Bug Fixes

• Minor memory leaks fixed.

Changes

• Improved left menu. It is no longer allowed to reactivate the active page. In addition, the cursor normally appears as an arrow on the active page. It continues to be a hand sign on other inactive pages.